Past Projects

Bottle Filling Line PLC Control

We were asked by our client, Omega Chemicals, to create a PLC program for the control of their Acid filling line which involved control of conveyors, solenoids, safety relays and operator controls.

The program also give the ability for the operator to change the timing one the fill cycle to compensate for mechanical issues.

We programmed and installed a Siemens PLC for the customer and set it up on site with a result that the customer was pleased with the program as the machine ran more efficiently than it had done in the past.

View Case Study

Fire Alarm Car Stacker Interface

We were asked by a commercial building company to build a control panel which would allow them to integrate their car stackers with the General Fire Alarm so that in the event of a fire, power to the car stackers would shut down.

We built the control board and successfully tested it on site.

View Case Study

CCTV On Industrial Site

We installed a CCTV system for our a commercial client that works in the farm equipment industry. We worked with Dahua to develop a cutting edge system. The perimeter of the property is protected with PTZ cameras which automatically track and follow human and vehicle targets. We also used wide angle, Ultra HD tioc cameras which use active deterrence features to lower the likelihood of crime and to monitor incidents.

View Case Study

Plug and Play Electrical Cabinet

Our customer, Cleanaway came to us for a solution for a portable pumps control cabinet. To avoid the hassle of constantly rewiring the board at new locations they wanted a plug and play solution.

Although the total current draw of the machine was 160A we were able to provide a solution that does the job and is easy for them to use.

View Case Study

Custom Control Panel for Tiemans tankers

We were asked by Tiemans Tankers to build and install a control board to monitor temperatures of tank and control the output to  a gas burner to maintain a constant temperature.

The products being transported were asphalt and bitumen so the temperature consistency was critical. We sourced the materials, built the panels off site and installed, wired and commissioned for the customer; who was very happy with the end result.

View Case Study
images
visy_logo_retina
our-timeline_1995
Licensee-Logo-1-10

Make an Enquiry